Tube Forming Profiling machine
FUNCTIONS AND PARTS OF TUBE FORMING PROFILING MACHINE
This TUBE-FORMING PROFILING MACHINE is planned to produce welded metal tubes of any dimension and shape/section starting from metal plate. In order to carry out the above mentioned procedures this machine is equipped with nr.04 pair of rolls with adjustment handwheel and welding unit. The start plate must have a fixed width for the whole of its length so as to allow the best quality of the produced tube.
The welding of the tube is performed through fusion by means of an electro-welding machine (accessory). In order to avoid oxidation, the welding environment must not contain any oxygen; to this end one has to use an inert gas like ARGON.
This TUBE-FORMING PROFILING MACHINE is planned to produce welded metal tubes of any dimension and shape/section starting from metal plate. In order to carry out the above mentioned procedures this machine is equipped with nr.04 pair of rolls with adjustment handwheel and welding unit. The start plate must have a fixed width for the whole of its length so as to allow the best quality of the produced tube.
The welding of the tube is performed through fusion by means of an electro-welding machine (accessory). In order to avoid oxidation, the welding environment must not contain any oxygen; to this end one has to use an inert gas like ARGON.
TECHNICAL FEATURES
Type of machine TUBE-FORMING PROFILING MACHINE FOR METAL TUBES
Dimensions 850 x 500 x 1300 (h) mm
Tare weight About kg
Plate to be introduced Minimum thickness 0.18 mm, maximum thickness 1 mm
Possible Diameters Minimum 3 mm, maximum 16 mm
Working speed It can be set and adjusted by means of a potentiometer
Feeding and unloading procedures Automatic
Welding procedures By means of TIG welding machine (see its instructions manual) with Argon
Supports Non-skid and vibration-damping feet
Power Supply 380 V – 50 Hz – 4,5 kW
Noise levels at the work station LP < 80 dB(A)
Standard accessories delivered with this machine Adjustment handwheel (crank-lever) for the rollers of the rammers (mountings)
Accessories to be bought by the user Fume-exhausting suction hood of the welding area
Dimensions 850 x 500 x 1300 (h) mm
Tare weight About kg
Plate to be introduced Minimum thickness 0.18 mm, maximum thickness 1 mm
Possible Diameters Minimum 3 mm, maximum 16 mm
Working speed It can be set and adjusted by means of a potentiometer
Feeding and unloading procedures Automatic
Welding procedures By means of TIG welding machine (see its instructions manual) with Argon
Supports Non-skid and vibration-damping feet
Power Supply 380 V – 50 Hz – 4,5 kW
Noise levels at the work station LP < 80 dB(A)
Standard accessories delivered with this machine Adjustment handwheel (crank-lever) for the rollers of the rammers (mountings)
Accessories to be bought by the user Fume-exhausting suction hood of the welding area
