Machine for Rolled and screw Threaded Pins

FUNCTIONS AND PARTS OF Machine for Rolled and screw-Threaded Pins

The Machine for Rolled and screw-Threaded Pins is aimed producing metal rolled and screw-threaded pins which can be used within the field of the gold manufacturing industry (for example for ear-ring clasps and nuts). This machine begins the automatic working process by starting with metal wire inserted into the machine by means of an automatic feeding device, then it is automatically rolled, cut and in the end the finished product is automatically unloaded into its special collection container. Also a punching device is installed on this machine in order to put the trade mark stamp on each pin. The machine let to produce screw-threaded pins also by changing the milling rollers without any gold scrap.
Thanks to mechanical and functional setting procedures (by means of a PLC device) this machine allows an easy and quick change of the working parameters . The machine is also supplied by pieces automatic counter. 


TECHNICAL FEATURES OF THE Machine for Rolled and screw-Threaded Pins

TYPE OF MACHINE PR1 - Machine for rolled pins 
DIMENSIONS 660 x 400 x 1000 (h) mm
TARE WEIGHT About 60 kg 
LENGTH OF THE PINS TO BE ROLLED Minimum 8 mm, Maximum 18 mm
WORKING PARAMETERS Can be set by means of a PLC 
FEEDING AND UNLOADING PROCEDURES Automatic
STOP SYSTEM WHEN THE WIRE FINISHES Automatic
SUPPORTS FOR THE POSITIONING ON THE GROUND Non-skid and vibration-damping feet
POWER SUPPLY 220 V - 50 Hz - 0.5 kW 
COMPRESSED-AIR SYSTEM 4 bar 
NOISE LEVELS AT THE WORK STATION LP < 80 dB(A), when the protection shields are on
CUSTOMER SERVICE CENTRE G.B. MECCANICA - Italy